Causes of foam formation in water-based metalworking fluid

issuing time ：2022-10-27

Processing fluid in the working state, due to the spray formation of a large number of foam and can not be eliminated in time, mainly due to

a. high pressure and fierce water flow;

b. Too high concentration;

c. Soft water quality;

d. The liquid level is too low;

e. The system defoaming performance decreases, etc

Tel：+86-752-6391516

Fax：+86-752-6391556
Address：Longcheng Road Plant, Jelong Village, Yuanzhou Town, Boluo County, Huizhou City, Guangdong Province

E-mail：info@de-lubricant.com

About us

National Enquiry number:

Good quality and good faith service Efficiency from the lubrication

Online consulting